умные решения для телепроизводства

Поиск


По наименованию | По типу



Viper I

цена: руб.
поместить в избранное  

Viper I

Портативные широковещательные волоконно-оптические системы

Система Viper I, включающая катушечную систему Sidewinder, обрабатывает все сигналы на одном волоконно-оптическом кабеле. Обе системы имеют модульную структуру и обеспечивают двухстороннее видео (NTSC / PAL или HD-SDI), аудио, интерком и передачу данных. Эти функционально совместимые системы позволяют создать свою собственную конфигурацию Mussel Shell, стойки "442" или модульные блоки с намоткой. 
Используйте с TAC кабелем проверенные кабели и разъемы.

   

Особенности

  • Multichannel video and audio
  • HD-SDI and/or NTSC/PAL video
  • Mic/line analog and/or AES audio
  • RTS 2-Wire, Clear-Com or 4-Wire intercom
  • RS-232/422 and CCU data + GPI paths
  • Ethernet 10/100 or Gigabit for VoIP and laptop connections (Viper only)
  • Reel, Mussel Shell and 442 rack mount
  • Multimode or single-mode fiber
  • Convenient plug-in modules
  • Battery or AC operated
  • Anton/Bauer Snap-On option
  • Alarmed UPS protection
  • Extra-low power consumption
  • Wide temperature range
  • Military tactical cable and connectors
Скачать:  Viper_I

Specification

Video Tx/RX103 Module Set (NTSC/PAL)
Interface: RS-170, NTSC, PAL

I/O impedance (differential input, isolated from ground): 75Ω

Level, blanking level clamped to 0 V: 1 Vp-p

Freq. response:

  • (30 Hz to 5.0 MHz): ±0.15 dB
  • (-3 dB point, min.): 9 MHz

Signal to noise (weighted) min/typ: 68/71 dB
Differential gain: <2%
Differential phase: <1°
Luminance nonlinearity: <2%

Chrominance-luminance intermodulation distortion:<1% 

  • Delay inequalities: <10 ns
  • Gain inequalities: ±1 IRE

Line time distortion: <0.5 IRE
Field time distortion: <2 IRE p-p
Short time distortion: <3 IRE p-p
Long time distortion: <1 IRE peak
Dynamic gain, picture and sync: <1%

Video TX/RX259 Module Set
For 270 Mb/s SDI Video, conforms to SMPTE ST 259 specifications, see Tx/Rx259 datasheet
Video TX/RX292 Module Set
For SDI and up to 1.5 Gb/s HD-SDI video, conforms to SMPTE ST 292 specifications, see Tx/Rx292 datasheet

Audio TX/RX280 and TX/RX380 Module Sets
Digital transmission: 18-bit
Sampling rate (samples/s): 48 kS/s
Input impedance (balanced): 5 kΩ and 600Ω
Output impedance (balanced): 30Ω

Input levels: 

  • (max, low Z) dBm: -22, 8 and 18
  • (max, high Z) dBV: -24, 6 and 16

Output level, line, max: 18 dBm standard, 24 dBm optional
Frequency response at 8 dBm, 20 Hz to 22 kHz: ±0.2 dB
Total harmonic distortion + noise:

  • 20 Hz to 20 kHz at 8 dBm: <0.05%
  • 1 kHz at 18 dBm: <0.01%

Signal to noise ratio, unweighted, 20 Hz to 20 kHz, RMS: (ref. to 18 dBm clip reference): >90 dB

Auxiliary (requires 2-way TX/RX280 audio paths)
Intercom interface: 2 ch. 4-Wire (bal.) or 2-Wire (RTS or Clear-Com)
Signal to noise ratio (ref. to 10 dBm): 70 dB
CCU/data interface: RS-422, RS-232, or Sony CCU (e.g., RM-M7, RM-P3)
Transmission rate: 0 to 150 kb/s

Contact closure:

  • Port input: Normally high TTL level
  • Logic 1 = open remote contacts; connect to ground (Logic 0) to actuate
  • Output: Form 1A SPST, "normally open" isolated contacts

Electro-Optical (typ.)

Operating wavelength: 1310 nm
Transmitter (Tx) output into cable (dBm):
  • TX103, TX280: -14 (-10W/CWDM)
  • TX259 -8 (0W/CWDM)
  • TX292 -7.5 (0W/CWDM)
Receiver (Rx) sensitivity (dBm):
  • RX103, RX259: -25
  • RX292: -22
  • RX280: -30
Operating wavelength: 1550 nm
Transmitter (Tx) output into cable (dBm):
  • TX103, TX280: -12
  • TX259: -8 (0 with CWDM)
  • TX292: 0*
Receiver (Rx) sensitivity (dBm):
  • RX103, RX259: -27
  • RX292: -22*
  • RX280: -30

Mechanical/Electrical/Environmental

Reel (incl. Sidewinder): 

Dimensions (W x H x D): 

  • S: 304.8 x 304.8 x 304.8 mm (12 x 12 x 12 in.)
  • M: 381 x 406.4 x 330.2 mm (15 x 16 x 13 in.)
  • L: 457.2 x 533.4 x 355.6 mm (18 x 21 x 14 in.)

Weight, empty: 

  • S: 5.4 kg (12 lbs.)
  • M: 6.8 kg (15 lbs.)
  • L: 12.7 kg (28 lbs.)

Mussel Shell: 8-module 

  • Dimensions (W x H x D): 368.3 x 355.6 x 76.2 mm (14.5 x 14 x 3 in.)
  • Weight (nominal, loaded): 4.5 kg (10 lbs.)

422 rack mount chassis: 

  • Dimensions, w/o mounting ears (W x H x D): 424.18 x 88.9 x 266.7 mm (16.7 x 3.5 x 10.5 in.)
  • Weight: 3.6 kg (8 lbs.)

Power consumption, nominal (loaded with 4/8 modules): 10/20W
No. of video module slots available (Mussel/442/Sidewinder): 4/4/2
No. of dual audio module slots available (Mussel/442/Sidewinder): 4/4/2
Video connectors (NTSC and HD-SDI): BNC
Audio connectors (analog and AES): 3-pin XLR, male or female
Intercom connectors (duplex, on intercom module): 

  • RTS module (one dual channel) one 3-pin XLR, male
  • Clear-Com module (2 channels) two 3-pin XLR, male
  • 4-Wire module (2 channels) two 5-pin XLR, male

Optical connectors/ attachment: 

  • Inside Mussel Shell or Sidewinder reel hub — to modules: ST-type
  • Cable Plug End: 4-pin military hermaphroditic plug (MX or Delphi)
  • Mussel Shell: 4-pin military hermaphroditic receptacle (MX or Delphi)
  • Rack mount 442 Enclosure (see MCRV breakout below): ST-type
Power connector: 4-pin XLR
Battery mount (optional): PAG or Anton/Bauer Snap-on Gold Mount
Input voltage range: 12 to 24 VDC (30 VDC max.)
Operating temperature range: -40° to 70° C (-40° to 158° F)
Humidity range: 0 to 95% non-condensing
*For HD-SDI over distance at 1550 nm, requires single-mode fiber and DFB/CWDM laser.


sps_rss.png


  • запрос менеджеру

  • избранное

  • облегчи поиск

  • 20 лет в спорте
  • Наши проекты
  • Сертификат НАТ