Ignite Konnect

Интеграция видеомикшеров Kayenne и Karrera с системой автоматизации Ignite

Ignite Konnect системы автоматизации производства Ignite позволяют выбирать уровень автоматизации, который наилучшим образом соответствует конкретному рабочему процессу и среды производства. Ignite позволяет ускорить переход к цифровой технологии и устранения технических ошибок, что позволяет увеличить производительность с меньшим количеством персонала. 

Это переход к гибкой автоматизации управления без изменения существующего рабочего процесса микшеров. Ignite Konnect масштабируется по потребностям и можно использовать уже реализованные эффекты в  видеомикшерах Kayenne и Karrera. Скачать: Ignite Konnect 1, Ignite Konnect 2

Особенности

• Transition easily between back-to-back newscasts
• Proven to easily handle any breaking-news scenario
• Float, drop, and add stories within seconds
• Improved ROI vs. equipment-only depreciation
• Enables reallocation of headcount from content moving to creating
• Enables increased programming opportunities, revenue stream via single workflow
• Provides direct link between rundown and on-air programming
• Cost-effective solution for new, live multicast channels and multidistribution opportunities
• Event-driven technology allowing one person to direct an entire production
• Scalable architecture:
  • One to four mix/effect (M/E) banks
  • 24-96 video inputs
  • 24-96 audio inputs
  • Single or fully redundant Ignite application servers
• Configurations available without audio
• Enhanced automation with Ignite IQ
• Optional video switcher panels for manual operation when desired
• Switchable SD and HD formats, including 1080i and 720p and 525- and 625-line
• MOS-driven workflows for newsroom computer systems, digital news production, and graphics automation systems
• Control-room solution airing hours of newscasts every day in top US markets
• Manual control permits override of any command pre-stored on event timeline
• Emmy® Award winning industry leader for more than 10 years

Specifications

Device Control
Control ports: Up to 32 – for cameras, VTR/servers, CG/SS, etc.
Signal type: RS-232, RS-422 (software selectable)
Serial interface: RS-232, RS-422 – RJ-45 (8-pin)

Video Standards
HD Mode:

• 1080i25/29.97/30
• 1080PsF23.976/24/25
• 720p50/59.94/60

SD Mode:

• 525i59.94
• 625i50

Power
Video Processing Frame 4 RU:

• Line voltage: 100-240 VAC ±10% autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sources
• Line frequency: 50/60 Hz ±5%
• Power consumption: Max. 400W
• Leakage current: <2.5 mA

Video Processing Frame 8 RU:

• Line voltage: 100-240 VAC ±10% autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sources
• Line frequency: 50/60 Hz ±5%
• Power consumption: Max. 800W (1000W with EDPM)
• Leakage current: <2.5 mA

Control Panel
Line voltage: 100-240 VAC ±10% autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sources
Line frequency: 50/60 Hz ±5%
Power consumption: Max. 200W
Leakage current: <2.5 mA

Serial Digital Video Inputs
Formats:

• ITU-T R656
• SMPTE 259M, 270 Mb/s
• SMPTE 292M, 1.5 Gb/s

Return loss: >15 dB, 5 MHz to 1.5 GHz
Type of connector: 75Ω BNC (SMPTE 259M)
Interface:

• HD video formats SMPTE 292M-1998
• SD video formats SMPTE 259M-1997

Nominal amplitude: 800 mVp-p terminated
Channel coding: conforms to SMPTE 259M, SMPTE 292M
Ancillary data: blanked or passed (user selectable)
Embedded audio: blanked or passed (user selectable)
EDH: blanked
Input impedance: 75Ω
Max. cable length:

• HD video 100m (328 ft.) max. length using Belden 1694A type cable
• SD video 300m (984 ft.) max. length using Belden 1694A type cable

Serial Digital Video Outputs
Format:

• ITU-R601/656
• SMPTE 259M, 270 Mb/s
• SMPTE 292M, 1.5 Gb/s

Return loss: >15 dB, 5 MHz to 1.5 GHz
Type of connector: 75Ω BNC (SMPTE 259M)
Interface:

• HD video formats SMPTE 292M-1998
• SD video formats SMPTE 259M-1997

Nominal amplitude: 800 mVp-p across 75Ω
Rise and fall times: 400 to 1400 ps 75Ω termination between 20% and 80% amplitude
Timing jitter: ≤1 UI (HD, SD)
Alignment jitter: ≤0.2 UI (SD), ≤1 UI (HD)
Output impedance: 75Ω
DC offset: <50 mV with 75Ω termination

Analog Reference Input
Video standard:

• For HD video: Tri-level sync, analog equivalent to the standard being used
• For SD video: color black, analog equivalent to the standard being used

Return loss: >40 dB, up to 5 MHz
Connectors: 2 each, BNC loop-through for both HD and SD inputs
Impedance: 75Ω external termination

Communications
Connections:

• Panel to frame: LAN cable 100m (328 ft.) max. length
• Menu panel to frame: LAN cable 100m (328 ft.) max. length

Interoperability: The Karrera Video Production Center is fully interoperable with the Encore, Jupiter, and SMS-7000 routing control systems; LDK Series cameras using LDK Connect Gateway; and with the K2 media server family (including the K2 Summit and K2 Solo), legacy Profile servers, M-Series iVDRs, Turbo iDDRs, and T2 iDDRs. The Karrera Video Production Center supports Ethernet and serial AMP protocol (standard in all systems), BVW and Odetics protocols, as well as controlling devices using PBusII and GPIs

Supported Control Protocols

• VTRs (BVW-75)
• AMP (advanced media protocol) for Profile PVS, Profile XP Media Platform, K2, M-Series, Turbo iDDR, and T2 iDDR systems over Ethernet
• Routing switchers/routing control systems (Trinix/Trinix NXT, Venus, Triton, and third-party routing switchers; Encore and Jupiter routing control systems)
• Serial tally requires third-party tally box such as Tally Display or Image Video
• Grass Valley external remote AUX panels
• Edit controllers

Environmental Conditions
Storage temperature: -20 to 70º C (-4 to 158º F)
Operating temperature: 0 to 40º C (32 to 104º F)
Relative humidity: 0-95% (non-condensing)
Electromagnetic environment: E2 (according to EN55103-1, -2)